Sales: 0161 925 7660

DrayTek Wireless Access Point

DrayTek Vigor 3910 10Gb VPN Concentrator Landing Page Banner

Draytek Wireless Access Point

InVIGORate Your Business Network With DrayTek.

DrayTek VigorAP 912C – A High Performance Ceiling Mounted Mesh Wireless Solution

The DrayTek AP912C is designed to expand coverage, eliminate Wi-Fi dead zones and significantly reduce the cost of network deployments. It supports both standalone operation and operating as part of DrayTek Mesh.

VigorAP 912C Key Features

  • Ceiling-mount mesh wireless access point and range extender
  • AC1200 - 11ac ‘wave 2’ dual band wireless
  • Power through 802.3af PoE or DC power adapter
  • Multi-SSID over Mesh – New! separate internal and guest networks over mesh
  • Centrally managed or standalone operation
  • Advanced access control with mobile device management and station control

For full features and technical specification, see data sheet Item Code: 66830

DrayTek VigorAP 918RPD – Ruggedised Outdoor 11ac Wave 2 Mesh Wireless AP

The VigorAP 918RPD access point is a ruggedised outdoor mesh wireless mesh access point designed for reliable operations in any outdoor scenario, so users can provide wireless where it’s needed.

VigorAP 918RPD Key Features

  • Outdoor mesh wireless access point and range extender
  • IP67 - Designed to provide reliable wireless outdoors in all conditions
  • AC1300 - 11ac ‘Wave 2’ dual band wireless with omni-directional antennas
  • 5GHz high-gain directional antenna, up to 866Mbps point-to-point link (RPD model)
  • Gigabit ethernet port with Power over Ethernet Input
  • VigorAP 918RPD provides 2nd gigabit ethernet port with PoE output
  • Centrally managed or standalone operation

For full features and technical specification, see data sheet Item Code: 66876

DrayTek VigorSwitch P1280 – PoE Web Smart 28-Port Gigabit Switch

24 PoE+ Ethernet Ports & 4 Combo RJ-45/SFP Ports

The VigorSwitch P1280 is a high-performance, gigabit switch with PoE+ (Power over Ethernet) on 24 RJ-45 ports (plus 4 additional gigabit ports). With the increase in PoE powered devices requiring full power, notably wireless access points and IP cameras, the generous 340W power budget is much higher than many other products in its class.

The DrayTek VigorSwitch P1280 has 4 gigabit SFP module ports which can be used instead of the corresponding RJ-45 ports Nos. 25-28. SFP slots are typically used for fibre transceivers. In comparison to 'copper' (RJ-45) cables, using fibre for connectivity provides longer range and resilience from electrical interference.

The SFP ports provides compatibility with your choice of SFP modules (not included) and therefore the most appropriate medium for your application. If you use the SFP slots, then the corresponding copper port is not active but the others remain available.

Power Over Ethernet

The VigorSwitch P1280 is a PoE (Power over Ethernet) switch, providing power to any PoE-enabled device, most commonly IP phones, wireless access points or IP cameras over the ethernet cable.

As well as removing the need for local (at the desk) power supplies, making for tidier installations, PoE ensures power efficiency, providing only the power needed, as well as allowing for time schedules for powering up/down and remote rebooting. Power is provided only when required. PoE also allows for installation of devices where there is no mains power (particularly useful for wireless access points).

The P1280 supports both standard PoE (802.3af) and High-Power PoE (802.3at) devices.

VigorSwitch P1280 Key Features

  • 24+4 port gigabit managed switch
  • PoE (Power-over-Ethernet) for IP phones, wireless access points, IP cameras etc.
  • Pow802.3af (PoE) and 802.3at (High Power PoE)
  • 802.3az power saving
  • 802.1q VLANs (Tag & Port)
  • QoS for application traffic prioritisation
  • Voice VLAN for QoS (OUI Mode)
  • Access control list (ACL)
  • Port mirroring & link aggregation
  • IGMP snooping/querier (up to 256 multicast groups)
  • IPv4 and IPv6 support
  • Centrally managed or standalone operation

For full features and technical specification, see data sheet Item Code: 61423

DrayTek VigorSwitch P2121 – PoE L2 Managed 12-Port Gigabit Switch

8 PoE+ Ethernet Ports & 4 Combo RJ-45/SFP Ports

The VigorSwitch P2121 is a high-performance, managed gigabit ethernet switch with PoE+ (Power over Ethernet) on 8 RJ-45 ports. With the increase in PoE powered devices requiring full power, notably wireless access points and IP cameras, the generous 140W power budget is much higher than many other products in its class without fan cooling.

Designed for centralised management, the VigorSwitch P2121 can be provisioned and monitored through both the VigorACS management platform and/or, a DrayTek Vigor router’s Central Switch Management. Easily provision the VLAN configuration through the router and clone switch configurations. Drastically reduce the setup time required for a complex network, with VLANs spanning multiple switches.

The switch can be used simply on a desk, or securely fitted to a wall / shelf, or rack mounted (1u) with the included mounting brackets.

For full features and technical specification, see data sheet Item Code: 63544

DrayTek VigorACS – Central Management Platform

Manage DrayTek Vigor Routers, Switches & Access Points

The DrayTek products can be managed by the DrayTek VigorACS central management system - a cloud platform which can manage most DrayTek products - routers, wireless access points and ethernet switches, giving compan complete visibility and control of your DrayTek product estate, even without a DrayTek Vigor router on site.

The DrayTek VigorACS management system can be used to configure and provision devices, similarly to performing these actions through the devices web interface, with a familiar menu layout in the Configuration section of VigorACS.

DrayTek's VigorACS management monitors the devices, with a Dashboard view giving a central overview of the most important information from the device’s status.


eCommerce by: Cohesion Digital